M-Audio Pulsar II Mics

M-Audio Pulsar II
Matched Pair Small-Diaphragm Condenser Microphone.

4tracks Recording Studio - Tijuana - Baja Mexico - M-Audio Pulsar Ii Small Diaphragm Stereo Mics 1 4tracks Recording Studio - Tijuana - Baja Mexico - M-Audio Pulsar Ii Small Diaphragm Stereo Mics 2 4tracks Recording Studio - Tijuana - Baja Mexico - M-Audio Pulsar Ii Small Diaphragm Stereo Mics 3 4tracks Recording Studio - Tijuana - Baja Mexico - M-Audio Pulsar Ii Small Diaphragm Stereo Mics 4

Capture Superior Stereo Recordings

Carefully selected for their nearly identical response, matched pairs of Pulsar II microphones from M-Audio® deliver superior stereo performance. The brass bodies are equipped with internal shockmounts and low-noise transformerless electronics. Each microphone offers a switchable 10 dB attenuation pad, plus an 80 Hz low-cut filter. Together, these functions allow the Pulsar II microphones to adapt to a variety of applications.

The included hardware package allows Pulsar II microphones to be mounted in either an X-Y or ORTF (110º) stereo configuration. While ideal for stereo use, these microphones can also be used independently in a wide range of critical recording situations. This complete package includes a stereo mounting bar, hard mounts, risers, windscreens, and cloth bags, as well as a handsome and functional wooden storage/travel case.

Features

  • Two response-matched M-Audio Pulsar II microphones
  • 0.75″ diameter, 6-micron sputtered gold diaphragms
  • Cardioid pickup patterns
  • Class A FET transformerless electronics
  • Brass bodies with internal shockmounts
  • Switchable 10 dB pads and 80 Hz filters (18 dB/octave)
  • 48 Volt phantom power required
  • Includes stereo bar, hard mounts, risers, wind screens, and soft bags—all in a wooden travel case

Specifications

  • Type: Small diaphragm condenser, gold evaporated
  • Polar pattern: Cardioid
  • Frequency Response: 20 Hz-20 kHz
  • Sensitivity: 13.8 mV/Pa (-37dBV)
  • Max. SPL (<0.5% Threshold Level): 134dB; 144 dB using -10 dB Pad
  • Equivalent Noise Level: 15dB—A weighted
  • Output Impedance: 300-600 Ω
  • Suggested Mic Pre Input Impedance: 1 – 2.5k Ω
  • Preamp Topology: Class A FET, transformerless
  • Power Requirement: 30 VDC – 50 VDC phantom power
  • Connector: 3-pin male XLR
  • Dimensions: 22mm (0.87″) diameter x 132mm (5.20″) length
  • Weight: 115 g (4.0 oz.)